Saturday, November 28, 2009

PAINTING: Ork Air Waaagh finished

I finished painting my Ork bommer last night. Like my previous models I slathered it in a heavy Badab Black wash and let it dry overnight. This morning I took some photos of it, along with a photo of my whole Air Waaagh.

The bommer didn't take long to paint, despite it's size compared to the fightas and fighta-bommers. I had already undercoated it black and then drybrushed it Boltgun Metal.

My first job was to paint Mechrite Red over virtually the whole model. Once that had dried I painted Blood Red over the individual armour plates. It was at this point I could have spent a lot of time highlighting each plate and maybe painting some in different colours but I just painted each plate red, leaving the darker red in the gaps.

The next small step was to block in the cockpit glass with Knarloc Green. There was so much glass I used some Dheneb Stone to highlight the upper edges.

I also used Knarloc Green to paint the Ork dropping bombs out the back.

I picked out the details in Dheneb Stone. The checks on the wings are sculpted detail so they were easy to paint. The teef on the nose are also modelled on. I pondered painting on some further markings but decided against it. I figured the model was distinctive enough as it was.

The engines were such a stand out feature I thought they needed an extra bit of attention. I washed the back end of them with Devlan Mud. When that had dried I applied the Badab Black wash over the whole model.

Here is the whole Ork Air Waaagh finished.

I'm fairly pleased with my efforts. It's a classic case of balancing the look of the models against the time it takes to paint them. I could have done a better job but it would have taken far longer, and time is something that is at a premium at the moment.

So, onto the Imperial Navy planes next.

3 comments:

  1. Very nice looking force. Are you going to do the imperials next?

    ReplyDelete
  2. Cheers guys. I have two IN Lightnings and two Marauders left to paint.

    ReplyDelete